Plastering is an age-old and unique technique that enhances the aesthetics of the building. A professional plasterer knows how to prepare the right plastering mix, which eventually helps create the best finishing on the walls and ceilings. Before we dig deeper into the type of plaster finishing, you must know that a good plastering finish depends on the plastering mix and how skilfully a plasterer applies it. For example, the wet plaster on the surface should not be more than .03m. But if the surface is uneven, then the plasterer can go for additional thickness.
Some of the key aspects that a plasterer needs to take into account:
As a plastering expert, one is required to have both technical and creative skills to create the right impact. Here are a few areas where plasterer should never go wrong:
- Preparing the right plastering mix
- Surface preparation before application of plaster
- Once the first layer of plaster, allow it to dry completely before applying the second layer.
- It is important to create an even surface before the application of plaster.
These are some of the key tasks that a plastering contractor performs and should excel at. Besides, one also has to master the skills of different types of plastering finishing. Some of the common types are:
Sand faced finishing
Usually, in this case, the first coat is in a zig-zag pattern, and then curing is done for seven days, after which the second layer is applied. The cement to the sand ratio for the first layer is 1:4 and the thickness is 12mm. The second layer is of 8mm thickness while the cement-sand ratio is kept at 1:1.
Rough Cast finishing
This has a coarse coat and give a rough finish. It is used in areas with high exposure and severe conditions. The right ratio is 1:1.5:3; the size of coarse aggregate in the case ranges between 3mm to 12 mm.
Pebbledash finish
If you want to create the final coat of pebble, then this type of finishing is required. In this case, the plastering finishing is 12 mm thick, and cement and sand are used in the ratio of 1:3. Once the plastering is done, the pebbles of 10 mm to 20mm are press into it and then allow to dry.
Smooth coat finish
As evident from the name, this is a smooth finishing and is the most common form of plaster finish. In this, the plastering contractor uses cement and sand in the ratio of 1:3.
Depeter Plaster Finish
This plastering finishing is similar to the pebble finish. In this case, gravel is pressed into the 12 mm thick layer of plaster instead of pebbles.
By now, you know about the work of a plastering contractor and the different types of plaster finish that you can go for. So, it all boils down to choosing the best contractor for your project. The following steps are going to help you in finding the best plastering expert:
- Experience counts- The key parameter that must be on your radar is the experience of the plasterer. With experience comes credibility and quality work.
- Reviews and ratings- The internet has made things quite easy; you can easily look for the best plastering contractor online and finalize the one that has the best rating. Make sure that you review the third-party website for this. It will give you more authentic results since paid reviews have become a norm these days and it’s difficult to identify them.
- Check their work- Good plastering work results from years of experience, expertise, and creativity. When you are hiring a contractor for your work, you must check their portfolio of work. It gives you a better understanding of their work profile and will help you make the right decision.
Conclusion:
This overview of plastering and the role of a plastering expert will be helpful for your future projects. Make sure that you hire the best contractor who can fulfill your requirements.
