As a farmer, water is the most precious resource for you! Your crops survive on them, and you know you’ll need it forever! But little do you know that a lot of water wastage happens unintentionally through the farming task if the water isn’t pumped properly and not irrigated to the crops evenly. Also, an improper distribution of water or an oversupply of it to crops can destroy them and steal the nutrients from the soil.
The ultimate goal is to achieve sufficient irrigation for the crop and your priority should be to save wastage of water! In order to achieve all these efficiently, you need to pay close attention to install an agricultural irrigation pump from Otech Irrigations that provides pumps which are ISO certified, stays firm in place working effectively for decades, and are designed according to your requirements and demands by expert engineers.
Factors to consider when choosing irrigation pump!
Selecting agricultural irrigation pumps is a tough task due to their long-term use and costs. A wrong choice or some essential factors ignored, and you’ll have the entire seasonal crop destroyed, double efforts needed and even millions of financial losses. That is why, it’s wise to make your choice of irrigation pumps appropriately considering the following factors!
Desired operating pressure — Irrigation systems are made to provide the correct amount of water in order to maintain the plants’ vigour. Each land requires a significant pressure of water distribution in it. To choose the right irritation pump, inquire about the operating pressure requirements from the irrigation plan with the required maximum pressure — and then get the most suitable pump accordingly.
System flow — It is crucial to understand the scope of the system. Mostly, irrigation is divided into parts depending on the different sections of plants which are watered at different intervals. The flow requirements of these zones of irrigation equipment impact the size and type of pump. Note the maximum flow requirement of the largest zone in your irrigation plan and let your pump provider know about it.
Friction losses — It’s very essential to calculate the total head loss apart from the elevation change from the outlet of the pump towards its highest sprinkler head. This calculation is added to the pressure requirement of the devices for the total head the pump should generate. This in turn will yield the system’s hydraulic needs to appropriately size the pump.
Budget — The design of your irrigation system and your site’s characteristics have a significant effect on the cost of the pump. Your irrigation system designer may advice for pipe sizing, pump placement or watering time preferences according to the amount you can shed. When budget becomes constraint, a pump specialist may recommend some changes in the pipe design to make the irrigation system more efficient.
Distance of pumping — The distance in which you pump the water affects the water pressure. Therefore, before opting for a pump, you’ll have to consider how far you’re going to pump the water to reach your sprinkler heads. Basically, you’ll require to increase or decrease the diameter and size of the pump accordingly to maintain the best possible flow and pressure of water.
Reducing water consumption and still achieving great pump performance is an accomplishment in itself. Ensure to carefully reflect upon your requirements and get the most suitable pump to achieve the best results in your farms!
