A forklift with a good number of options would be the most suitable machine for a warehousing business as it has very few problems and lasts long. One such option is a forklift radiator, an engine cooling device specifically designed for this machine. Due to constant use, a forklift can get just as hot as other vehicles, and so the need for a radiator.
Top features of a forklift radiator
While looking to Purchase Forklift Radiator, you may want to choose the machine as per your exact requirements. Be sure to consider the following features prior to your purchase:
- Ensure that you get the best warranty in the market. You wouldn’t want to keep returning the radiator for a new one, would you?
- Radiators made from plastic-aluminum material are the best suited for most companies
- Find the forklift radiators which are able to work with multiple fittings
- Each radiator must be made from high quality parts and should be capable of heavy duty use
- The device should be big enough to handle a large coolant volume
- It must be possible to buy forklift radiators at wholesale prices
It is necessary for the forklift’s engine temperature to be at the right operating temperature, which is made possible using the radiator. Whenever the engine gets excessively heated due to lifting work, radiators circulate coolant liquid throughout. Hot fluids are released from the engine via a network of zigzag tubes, with the tubes being able to cover maximum surface area.
Lower maintenance costs with these installations
To further minimize overheating chances, you can get a radiator screen installed. This is able to reduce accumulation of fibers, lint and other kinds of workplace debris that may be present within the radiator fins. It is possible to clean this screen regularly, and doing so at the time of pre-shift inspections would be really helpful.
Apart from radiator screens, you can utilize the following options to bring down maintenance costs for your factory:
- Hydraulic Accumulator– It is able to absorb vibrations that occur on rough floors, thereby decreasing the effect of vibration on any load. Not only does it act as a shock absorber, but also increases operator comfort, enhances the life of various forklift parts and reduces product damage. This machine is highly recommended for yards and rough floors.
- Regulator Drain Valve– This helps drain fuel contaminants emerging from the LPG regulator at the time of routine vehicle inspection, thereby increasing the life of every forklift component.
- Pre-cleaner– This makes the air cleaner more free of dust than it would normally be, allowing trucks to operator longer between services. As one can see the amount of dust, it becomes easy to clean using the pre-cleaner. Consider it to be suitable for all dirty applications of the forklift.
- String cutters– If you are disturbed by the debris getting entrapped in the drive axle, it would help to install string cutters on the axle’s right and left side.
- Tilt cylinder boot– This device is meant to protect the forklift’s tilt cylinder rod from getting damaged in dusty and dirty environments. It is suited for all dusty and dirty applications of the forklift.
Materials used for constructing radiators
Radiators have been in use since a long time, whether in cars, trucks or forklifts. Copper and brass were the materials traditionally used to construct them. These are still preferred for reasons such as longevity, reliability and robustness, all of which are essential for heavy industry, transport and mining. In comparison this, manufacturers of modern cars make use of aluminum radiators, fitting them with plastic tanks.
Should the radiator have several tubes?
In most cases, the number of rows of tubes increases in direct proportion with the heavy duty use for a radiator. If case loads are being pulled close to the forklift’s capacity, it would make a lot of sense to install a heavy duty radiator.
Tubes in the radiator should ideally be spaced either 12mm or 16mm away from each other. They could be fitted in an in-line, cantered or staggered manner for maximum air flow.
Types of radiator designs
Two kinds of radiator designs are primarily in use:
- Down flow – It is available in high profile and thereby is uncommon among today’s vehicles. The name is such because coolant goes “down” from the inlet tank to the bottom tank, connected by a flexible hose to water pump’s inlet.
- Cross flow – Commonly seen in modern cars, the down flow radiator is turned to its side here. Since header tanks are on the sides of each other, the coolant now travels horizontally and not vertically.
Always ensure that you buy forklift radiators from genuine companies with the necessary quality standard. Though price is certainly an important criterion, it shouldn’t be the only deciding factor for you.
