Many of you have folded the pages of your school geography books. The average temperature you have heard about your country from time to time. For the UK, many of you have still remembered. Whoa, that’s too cool to hear that the average temperature is somewhere 15 to 25 degrees Celsius. Okay, this figure can vary, but somewhere a major proportion will accept this data. So, the cold winters of the UK are quite a common scene. Hence, it is essential to take care of all such things that can help you to keep your body warm. For this, you will like to install a proper heating system in your house to keep you and your family safe. In this article, you will learn about the steps to install an electric combi boiler. You will also know about what this device is and how it works.
About Electric Combi Boiler
A combi boiler is nothing but a blend of boiler and water heater. It is a type of heating system that provides hot water and heat to let your house warm from time to time. Hence, this device is multi-functional. These niches help to ensure that the size of the boiler is also compact. Thus, these boilers are suitable for both small and medium-sized houses. Combi boilers also don’t have hot gas cylinders due to they occupy less space in a house, the reason for their compactness is already discussed above. Installing an electric combi boiler needs some expertise, and due to this, you need to consult someone for this purpose. But, if you want to go for combi boiler installation.
Step 1 – Mounting Plywood Panel
Installing a combi boiler starts with a plywood panel mounting to any portion of a basement wall. It may take some time, so do it with great care. You need to make new connections or run new electrical, gas, and plumbing lines over this mounted plywood panel. Next, you need to screw some metal mounting brackets to the plywood panel and hang the combination heater in these brackets. Once done, you have to check out the space for the air intake vent and exhaust vent. For this, you have to drill a 4-inch diameter hole twice through any part of the house wall. But, before drilling, you must know that this air intake vent must always be above the snow line. Hence, there is a requirement for proper measurements and calculations. Add some courage to go outside your house to find the snow line.
Step 2 – Creating Vents & Making Connections
For creating the vent after drilling, you need to have an apt PVC pipe and fittings. Connect this pipe with the boiler from outside through the exterior wall. Once completed, you need to connect both cold and hot water lines (obviously, the summer will also arrive in a year) for water delivery to the boiler’s heating system. After accomplishing this errand, you have to connect a new electrical cable and gas line as well with the combi boiler. Ensure that you install a thermal sensor on the north side of the house for temperature regulation and, in turn, resulting in hot water generation.
Step 3 – Get Set
Before starting to use this electric combi boiler, there is one last step remaining. Now, add a PVC condensate line with a limestone neutralizer into the combi boiler’s heater. It will be helpful for floor draining or sink draining to eliminate excessive condensation. With this, it completes the entire process, and you are set to use it to tackle English winters. So, stop worrying about chilly and shivering winters and bring an electric combi boiler.
Conclusion
The fear of English winters will not be on your checklist anymore due to an electric combi boiler. An electric combi boiler has become a new trend among British people due to its multi-functionality. Therefore, bring one and throw the winter outside your house.
